توضیحات
لیست لوازم یدکی عملگر برقی AUMA سری SA و SAR سایز های SA16.2 تا SA07.2
SA 07.2 – SA 16.2 | SAR 07.2 – SAR 16.2
AUMA SA 07.2 – SA 16.2 / SAR 07.2 – SAR 16.2 multi-turn actuator spare parts list
| Type | Description | Ref No | Type | Description | Ref No |
| Sub-assembly | Handwheel with ball handle | 542.0 | Sub-assembly | Housing |
001.0 |
| Sub-assembly | Output drive types B/B1/B2/B3/B4/C/E | 549.0 | Sub-assembly | Bearing flange | 002.0 |
| Sub-assembly | Output drive sleeve B/B1/B2/B3/B4/C/E | 549.1 | Sub-assembly | Hollow shaft | 003.0 |
| Parallel key | 551.1 | Sub-assembly | Drive shaft | 005.0 | |
| Sub-assembly | Mechanical position indicator | 553.0 | Motor coupling | 005.1 | |
| Sub-assembly | Socket carrier for motor plug/socket connect | 554.0 | Manual drive coupling | 005.3 | |
| Sub-assembly | Potentiometer as position transmitter | 556.0 | Worm wheel | 006.0 | |
| Sub-assembly | Potentiometer without slip clutch | 556.1 | Sub-assembly | Manual gearing | 009.0 |
| Heater | 557.0 | Sub-assembly | Torque lever | 017.0 | |
| Sub-assembly | Blinker transmitter including pins at wires | 558.0 | Gear segment | 018.0 | |
| Sub-assembly | Electromechanical control unit with switches, including torque switching heads | 559.0–1 | Crown wheel | 019.0 | |
| Sub-assembly | Electronic control unit with magnetic limit and torque transmitter (MWG) | 559.0–2 | Sub-assembly | Drive pinion II for torque switching | 022.0 |
| Sub-assembly | Switch stack for direction OPEN | 560.0–1 | Sub-assembly | Output drive wheel for limit switching | 023.0 |
| Sub-assembly | Switch stack for direction CLOSE | 560.0–2 | Sub-assembly | Drive wheel for limit switching | 024.0 |
| Sub-assembly | Switch for limit/torque | 560.1 | Sub-assembly | Locking plate | 025.0 |
| Switch case for direction OPEN | 560.2–1 | Sub-assembly | Cable for protective earth | 058.0 | |
| Switch case for direction CLOSE | 560.2–2 | Sub-assembly | Motor (only for V… motors incl. ref. no. | 070.0 | |
| Sub-assembly | RWG position transmitter | 566.0 | Sub-assembly | Planetary gearing for motor drive (only for V… motors) | 079.0 |
| Sub-assembly | Potentiometer for RWG without slip clutch | 566.1 | Sub-assembly | Reduction gearing | 155.0 |
| Sub-assembly | Position transmitter board for RWG | 566.2 | Sub-assembly | Cover | 500.0 |
| Sub-assembly | Cable set for RWG | 566.3 | Sub-assembly | Socket carrier (complete with sockets) | 501.0 |
| Sub-assembly | Slip clutch for potentiometer | 567.1 | Sub-assembly | Pin carrier without pins | 502.0 |
| Stem protection tube (without cap) | 568.1 | Sub-assembly | Socket for controls | 503.0 | |
| Protective cap for stem protection tube | 568.2 | Sub-assembly | Socket for motor | 504.0 | |
| V-seal | 568.3 | Sub-assembly | Pin for controls | 505.0 | |
| Threaded sleeve | 568.4 | Sub-assembly | Pin for motor | 506.0 | |
| Stem nut for output drive type A | 575.1 | Sub-assembly | Cover for electrical connection | 507.0 | |
| Sub-assembly | Motor coupling on motor shaft | 583.0 | Sub-assembly | Threaded plug | 511.0 |
| Pin for motor coupling | 583.1 | Sub-assembly | Output drive type A (without stem nut) | 514.0 | |
| Sub-assembly | Retaining spring for motor coupling | 584.0 | Sub-assembly | Axial needle roller bearing | 514.1 |
| Sub-assembly | EWG position transmitter | 614.0 | Radial seal for output drive type A | 514.2 | |
| MWG 05.03 cover | 627.0 | Sub-assembly | Output drive type D | 516.0 | |
| set | Seal kit, small | S1 | Output drive shaft D | 516.1 | |
| set | Seal kit, large | S2 | Snap ring | 535.1 | |
| Sub-assembly | Screw plug | 539.0 |
لطفاً هنگام سفارش قطعات یدکی نوع عملگر و شماره سفارش Com No و یا Order No (نوشته شده روی پلاک عملگر برقی ) را اعلام فرمایید.
لیست لوازم یدکی عملگر برقی AUMA سری SA و SAR سایز های SA16.1 تا SA07.1
SA 07.1 – SA 16.1 | SAR 07.1 – SAR 16.1
AUMA SA 07.1 – SA 16.1 / SAR 07.1 – SAR 16.1 multi-turn actuator spare parts list
| Type | Description | Ref No | Type | Description | Ref No |
| Sub-assembly | Axial needle roller bearing | 514.1 | Sub-assembly | Housing | 001.0 |
| Sub-assembly | Output drive type D | 516.0 | Sub-assembly | Bearing flange | 002.0 |
| Output drive shaft D | 516.1 | Sub-assembly | Output drive type B1/B/B2/C | 003.0 | |
| Snap ring | 535.1 | Sub-assembly | Drive shaft | 005.0 | |
| Screw plug | 539.0 | Motor coupling | 005.1 | ||
| Sub-assembly | Handwheel with ball handle | 542.0 | Coupling pin | 005.2 | |
| Sub-assembly | Output drive type B3/E/B4 | 549.0 | Manual drive coupling | 005.3 | |
| Output drive sleeve B3/E/B4 | 549.1 | Pull rope | 005.4 | ||
| Parallel key | 551.1 | Worm wheel | 006.0 | ||
| Sub-assembly | Mechanical position indicator | 553.0 | Sub-assembly | Manual gearing | 009.0 |
| Sub-assembly | Socket carrier for motor plug/socket connect | 554.0 | Sub-assembly | Retaining flange | 010.0 |
| Sub-assembly | Potentiometer as position transmitter | 556.0 | Sub-assembly | Torque lever | 017.0 |
| Sub-assembly | Potentiometer without slip clutch | 556.1 | Gear segment | 018.0 | |
| Sub-assembly | Heater | 557.0 | Sub-assembly | Crown wheel | 019.0 |
| Sub-assembly | Blinker transmitter including pins at wires | 558.0 | Sub-assembly | Swing lever | 020.0 |
| Sub-assembly | Electromechanical control unit with switches, including torque switching heads | 559.0 | Sub-assembly | Drive pinion II for torque switching | 022.0 |
| Sub-assembly | Switch stack for direction OPEN | 560.0-1 | Sub-assembly | Output drive wheel for limit switching | 023.0 |
| Sub-assembly | Switch stack for direction CLOSE | 560.0-2 | Sub-assembly | Drive wheel for limit switching | 024.0 |
| Switch for limit/torque | 560.1 | Sub-assembly | Locking plate | 025.0 | |
| Switch case | 560.2 | Sub-assembly | Cable for protective earth | 058.0 | |
| Sub-assembly | RWG position transmitter | 566.0 | Sub-assembly | Torque switching head | 061.0 |
| Sub-assembly | Potentiometer for RWG without slip clutch | 566.1 | Sub-assembly | Motor (only for V… motors incl. ref. no. 079.0) | 070.0 |
| Sub-assembly | Position transmitter board for RWG | 566.2 | Sub-assembly | Planetary gearing for motor drive (SA/SAR 07.1 – 14.1 for V … motors) | 079.0 |
| Sub-assembly | Cable set for RWG | 566.3 | Sub-assembly | Planetary gearing for motor drive (SA/SAR 16.1 for A …. motors) | 080.0 |
| Sub-assembly | Slip clutch for potentiometer | 567.1 | Sub-assembly | Reduction gearing | 155.0 |
| Stem protection tube (without cap) | 568.1 | Sub-assembly | Cover | 500.0 | |
| Protective cap for stem protection tube | 568.2 | Sub-assembly | Socket carrier (complete with sockets) | 501.0 | |
| V-seal | 568.3 | Sub-assembly | Pin carrier without pins | 502.0 | |
| Threaded sleeve | 568.4 | Sub-assembly | Socket for controls | 503.0 | |
| Change-over lever assy | 569.0 | Sub-assembly | Socket for motor | 504.0 | |
| Change-over lever | 569.1 | Sub-assembly | Pin for controls | 505.0 | |
| Notched pin | 569.2 | Sub-assembly | Pin for motor | 506.0 | |
| Stem nut A (without thread) | 575.1 | Sub-assembly | Cover for electrical connection | 507.0 | |
| Set | Seal kit, small | S1 | Sub-assembly | Threaded plug | 511.0 |
| Set | Seal kit, large | S2 | Sub-assembly | Output drive type A (without stem nut) | 514.0 |
لطفاً هنگام سفارش قطعات یدکی نوع عملگر و شماره سفارش Com No و یا Order No (نوشته شده روی پلاک عملگر برقی ) را اعلام فرمایید.
لیست لوازم یدکی عملگر برقی AUMA سری SA و SAR سایز های SA25.1 تا SA48.1
SA 25.1 – SA 48.1 | SAR 25.1 – SAR 48.1
AUMA SA 25.1 – SA 48.1 / SAR 25.1 – SAR 48.1 multi-turn actuator spare parts list
| Type | Description | Ref No | Type | Description | Ref No |
| Screw plug | 539.0 | Sub-assembly | Former housing (for bearing bush 600.0) | 001.0 | |
| Sub-assembly | Handwheel with ball handle | 542.0 | Sub-assembly | New housing (for ball bearing 635.0) | 001.0 |
| Sub-assembly | Output drive type B3/E/B4 | 549.0 | Sub-assembly | Bearing flange | 002.0 |
| Sub-assembly | Output drive sleeve B3/E/B4 | 549.1 | Sub-assembly | Former hollow shaft (for bearing bush 600.0) | 003.0 |
| Parallel key | 551.1 | Sub-assembly | New hollow shaft (for ball bearing 635.0) | 003.0 | |
| Mechanical position indicator | 553.0 | Drive shaft | 005.0 | ||
| Sub-assembly | Potentiometer as position transmitter | 556.0 | Motor coupling | 005.1 | |
| Sub-assembly | Potentiometer without slip clutch | 556.1 | Sub-assembly | Coupling pin | 005.2 |
| Heater | 557.0 | Manual drive coupling | 005.3 | ||
| Sub-assembly | Blinker transmitter including pins at wires | 558.0 | Sub-assembly | Pull rope | 005.4 |
| Sub-assembly | Electromechanical control unit with switches, including torque switching heads | 559.0–1 | Worm wheel | 006.0 | |
| Sub-assembly | Electronic control unit with magnetic limit and torque transmitter (MWG) | 559.0–2 | Sub-assembly | Manual gearing | 009.0 |
| Sub-assembly | Switch stack for direction OPEN | 560.0–1 | Sub-assembly | Torque lever | 017.0 |
| Sub-assembly | Switch stack for direction CLOSE | 560.0-2 | Drive wheel for limit switching | 018.0 | |
| Sub-assembly | Switch for limit/torque | 560.1 | Crown wheel | 019.0 | |
| Switch case for direction OPEN | 560.2–1 | Swing lever | 020.0 | ||
| Switch case for direction CLOSE | 560.2-2 | Drive pinion II for torque switching | 022.0 | ||
| Sub-assembly | RWG position transmitter | 566.0 | Sub-assembly | Output drive wheel for limit switching | 023.0 |
| Potentiometer for RWG without slip clutch | 566.1 | Sub-assembly | Drive wheel for limit switching | 024.0 | |
| Sub-assembly | Position transmitter board for RWG | 566.2 | Sub-assembly | Locking plate | 025.0 |
| Sub-assembly | Cable set for RWG | 566.3 | Sub-assembly | Cable for protective earth | 058.0 |
| Slip clutch for potentiometer | 567.1 | Sub-assembly | Motor | 070.0 | |
| Stem protection tube (without cap) | 568.1 | Sub-assembly | Planetary gearing for motor drive (for A…motor) | 080.0 | |
| Protective cap for stem protection tube | 568.2 | Sub-assembly | Reduction gearing | 155.0 | |
| V-seal | 568.3 | Sub-assembly | Cover | 500.0 | |
| Threaded sleeve (for SA/SAR 25.1 and 30.1) | 568.4 | Sub-assembly | Socket carrier (complete with sockets) | 501.0 | |
| Sub-assembly | Change-over lever assy | 569.0 | Sub-assembly | Pin carrier without pins | 502.0 |
| Change-over lever | 569.1 | Sub-assembly | Socket for controls | 503.0 | |
| Notched pin | 569.2 | Sub-assembly | Socket for motor | 504.0 | |
| Stem nut (without thread) | 575.1 | Sub-assembly | Pin for controls | 505.0 | |
| Bearing bush (for former housing) | 600.0 | Sub-assembly | Pin for motor | 506.0 | |
| Reduction frame | 602.0 | Sub-assembly | Cover for electrical connection | 507.0 | |
| Sub-assembly | Motor connection | 603.0 | Sub-assembly | Threaded plug | 511.0 |
| Sub-assembly | EWG position transmitter | 614.0 | Sub-assembly | Output drive type A (without stem nut) | 514.0 |
| MWG 05.03 cover | 627.0 | Sub-assembly | Axial needle roller bearing | 514.1 | |
| Shim washer (for new housing) | 634.0 | Radial seal for output drive type A | 514.2 | ||
| Ball bearing (for new housing) | 635.0 | Sub-assembly | Output drive type D | 516.0 | |
| Set | Seal kit, small | S1 | Sub-assembly | Output drive shaft D | 516.1 |
| Set | Seal kit, large | S2 | Snap ring | 535.1 |
لطفاً هنگام سفارش قطعات یدکی نوع عملگر و شماره سفارش Com No و یا Order No (نوشته شده روی پلاک عملگر برقی ) را اعلام فرمایید.
نقد و بررسیها
هنوز بررسیای ثبت نشده است.